Greater Cleveland Regional Transit Authority


Service manual xerox 3040

1 Reseat all connectors on the IP and MCU Boards. Does the error persist? Go to Step 2. Complete. 2 Replace the IP Board. Does the error persist? Replace the MCU Board. Complete. 010-397 Restart Printer Contact Support If Message Returns. - IP Board. (3010/3040) - IP Board. (3045) - MCU Board. 1 Reseat the Fuser and cycle system power. Does the error persist? Go to Step 2. Complete. 2 Check these connections - MCU Board P/J18 and P/J20. - LVPS P/J201. Are the connectors secure? Go to Step 3. Secure the connectors. 3 Check the Fuser harness. 1. Remove the Fuser. 2. Disconnect P/J18 and P/J20 from the MCU Board and P/J201 from the LVPS. Is the harness damaged? Repair the harness. Go to Step 4. 4 Replace the Fuser. Does the error persist? Replace the MCU Board. Complete. Write Flash Error Can not update parameters in FLASH. - IP Board. (3010/3040) - IP Board. (3045) - MCU Board. 016-502 Write Flash Error Contact Support If Message Returns. 016-315 Restart Printer Contact Support If Message Returns. Xerox Phaser 3040 Error Codes List page 1 from 6. 016-501 Write Flash Error Contact Support If Message Returns. 016-317 Restart Printer Contact Support If Message Returns. Memory Over flow The current job exceeds memory capacity. 1 Reseat all connectors on the IP and MCU Boards. Does the error persist? Go to Step 2. Complete. 2 Replace the IP Board. Does the error persist? Replace the MCU Board. Complete. 1 Reseat all connectors on the IP and MCU Boards. Does the error persist? Go to Step 2. Complete. 2 Replace the IP Board. Does the error persist? Replace the MCU Board. Complete. - IP Board. (3010/3040) - IP Board. (3045) - MCU Board. - IP Board. (3010/3040) - IP Board. (3045) - MCU Board. - IP Board. (3010/3040) - IP Board. (3045) - MCU Board. 1 Reseat all connectors on the IP and MCU Boards. Does the error persist? Go to Step 2. Complete. 2 Replace the IP Board. Does the error persist? Replace the MCU Board. Complete. 016-719 Decode Error Job Failure Press Stop to Cancel. Write Flash Error Can not update application code in FLASH. PDL Error The print data cannot be processed by PDL.